DC24EE

Superheat panel-mounting controller with management of PWM electronic expansion valve

Superheat panel-mounting controller with management of PWM electronic expansion valve

IP65 enclosure, display, power supply, 230 VAC, 3 relays, 1 electronic expansion valve output (triac) 24-240 VAC, 5 PT 1000 inputs, 1 0-10 V input, 2 digital inputs, bus interface, clock, plug-in terminals.
Compatible with all major pulse width modulated electronic expansion valves on the market (e.g. Danfoss AKV).

The DC24EE controller has very compact dimensions, which makes it easy to install directly in the cabinet.

The DC24EE module is a universal controller that performs measurement, monitoring and control functions for the following applications:

– control of cooling cabinets or cold rooms (MT and LT refrigeration) with superheat control using electronic expansion valves,
– compressor control,
– condenser management,
– humidity control,
– management of air conditioning and lighting zones,
– input-output mode.

The module can be mounted in the front of a cabinet or integrated in a display case.
The DC24EE module can be programmed using the Teleswin supervision software or directly via the buttons on the front panel. The integrated display shows the values measured by the connected sensors and is used for programming the parameters.

Retour au catalogue

Description

Technical documentation
Management of cooling units yes
Management of compressors yes (up to 3 compressors, with a pressure sensor 0-10 V)
Hygrometry yes
Programmable inputs-outputs yes
Concentration of gazes no
Air-conditioning - cooling/heatingyes
Management of lighting areas yes
White display yes
Inputs
      PT 10005 (also compatible with the probes: NTC 10K/25°C, L.243, KTY81)
      0-10 V yes
      4-20 mAno
      Digital2
Outputs
      Relays 3
      Triac (24-230 VAC) 1
      Analogue no
Power supply230 VAC
Remote monitoring bus interfaceyes
Clock yes
Electronic expansion valve yes
Local bus for extensionsno
Power supply
            Supply voltage 110-250 VAC, 50-60Hz
            Maximum input power 3 W
Protection rating1
Contamination rating2
Overvoltage categoryII
Conditions of use
            Temperature0-40°C
            Humidity0-80% (without condensation)
Breaking capacity of relays outputsinductive load 3 A 250 VAC, resistive load 8 A 250 VAC
Breaking capacity of triacs outputsInductive load 1 A 250 VAC, resistive load 1 A 250 VAC
Minimal current of triac output11 mA
Clock – reserve operating margin4 days
Input 0-10 V Range of measurement: 0-10 V

Cooling unit

Hygrometry management

Inputs – outputs mode

Cooling unit – control of several evaporators